Inflatable boat Navigator H390 Baltic

Description

Navigator Baltic H390 is an inflatable motor boat with rigid deck and inflatable keel.

Peculiarities:
High quality PVC material 1100g/m Omega (South Korea)
Floor segments are made of waterproof plywood (12 mm), manufacturer ODEK Ukraine
All deck fittings are protected by an aluminum profile. The sides of the deck have an aluminum protection that connects to the stringer.
For the manufacture of the cylinder frame and internal partitions, the heat welding method is used. This method ensures maximum sealing and security of the seams. The seam turns out to be monolithic as the main cord of the fabric.

Equipment:
Two packing bags, foot pump, repair kit (PVC material, glue), oars, mobile benches 2 pcs, floor segments 5 pcs. + 2 stringers

Basic equipment of the boat Navigator Baltic 390

The cylinder has 3 pressurized compartments + inflatable keel
An overpressure valve is installed in the bow
2 carrying handles are installed in the stern and bow parts.
Cylinders have 2 handles on each side for carrying or mooring.
For passengers, there are 4 pvc handles in the bow and one captain’s groin handle located on the right.
A ring for fixing the anchor rope is installed in the bow, a towing handle and 2 rings on the sides are installed below the beam.
The rail line runs along the perimeter of the boat.
As for the protection of the bottom:
Cylinders and Keel have 12cm protection

I would like to pay special attention to the height of the trim plate, which is 41cm (for motors with a short leg S). for all Navigator models. This value directly affects several indicators:
Speed, exit to the glider
Engine efficiency, its resource
Significantly reduces fuel consumption

This model is intended for operation on high water with a maximum load of up to 600 kg using a 9.8 – 30 hp motor.