Inflatable boat Navigator LP 320BK

Description

Promotional offer: buy a set with a discount boat + motor !!!

Keel boats with a half-book of the LK Navigator series are represented by boats LP 270BK, LP 300BK, LP 320BK.

Since 2017, the keel boat Navigator LP 320BK is equipped with: anchor roller !!!

The design of the boats has a U-shaped cylinders with a glued transom made of waterproof plywood. Cylinders are divided into 3 sealed compartments + inflatable kilson.

The patented shape of the boat, thanks to the all-sheet cutting of the fabric, has 4 circumferential and 2 longitudinal welds, which ensures high tightness of the cylinders.

The advantage of LK Navigator half-book inflatable boats

1) Entering the planing mode on motors with a power of 2.5 hp or more!!!

2) The keel V-shaped bottom allows you to increase seaworthiness and reduce shock loads when passing through a wave.

3) Course stabilizers (fins) installed in the stern provide better directional stability.

4) The use of a half-book floorboard significantly speeds up the process of assembling and disassembling the boat.

5) Longitudinal and circumferential seams are made by heat welding.

6) The boats are assembled from high-quality Korean PVC with a density of 900 g/m2, which ensures their long-term operation, without additional care for the seams.

7) For comfortable accommodation of passengers in the boat, a movable seat support system is used.

Standard equipment of inflatable boats with a half-book of the LK Navigator series

1) The welded frame of the cylinders is divided into 3 independent pressurized compartments.

2) Along the cylinders of the boat, a fender 9 cm wide with a wave baffle is glued.

3) A lifeline 8-10 mm thick is glued along the outer perimeter of the boat.

4) Type of the bottom – slant book (4-section) 9 mm thick, is a solid single structure fastened together with PVC tapes.

5) Reinforced stationary transom made of waterproof plywood 18 mm thick is glued into the aft part of the cylinders. The upper part of the transom is equipped with a protective lining.

6) For transporting the boat, 2 handles are used on the ends of the cylinders.

7) A universal eye-handle in the bow, made of durable plastic, is used to tow the vessel and anchor the boat.

8) An eye ring is used to fasten the anchor cable in the bow.

9) Two movable seats are easily adjustable along the entire length of the rails.

10) Two collapsible aluminum oars 1.6 meters long.

11) Foot boat pump for 6 liters.

12) PVC boat repair kit (PVC material, glue).

13) Operation manual.

14) Small craft certificate.

15) Packing bag for the boat – 1 pc.

16) Packing bag for a half-book – 1 pc.

17) Basic colors: green, dark gray, light gray !!!

18) A variant of the combined color of the boat is possible !!!