Inflatable bottom boat Navigator AIR 310 Standard (Navigator AIR 310 Standart)
710 $
Type of bottom: inflatable bottom (keel)
Outboard length, cm: 310
Outer width, cm: 159
Internal length, cm: 215
Internal width, cm: 68
Diameter of cylinders, cm: 44
Number of hermetic compartments, cm: 3+1
Cargo capacity, kg: 360
Passenger capacity, persons: 3
Recommended engine power, h.p.: 5-6 h.p.
Maximum engine power, hp: 9.8 hp.
Density of boat cylinder material, g/m2: 900 Plastel (Germany)
Boat bottom material density, g/m2: 1100 South Korea
Transom height, mm: 410 (including bottom)
Transom thickness, mm: 24
Handles for transportation, pcs: 2 at the ends
Oar length, cm: 160
Type of oars: swivel, pin type
Boat weight, kg: 38
Boat bag size, cm: 125*40*50
Warranty on welded seams, mos: 60
Warranty on pvc material, mos: 36
Warranty on inflatable bottom, mos: 24
Country, manufacturer: Ukraine, Navigator Group
- Description
- Reviews (0)
Description
Description
Special offer: buy a kit at a discount boat + motor!!!
The range of boats with an inflatable bottom starts with the Navigator AIR310
This is a first-generation inflatable boat model designed to operate on small rivers and reservoirs.
The main advantage of the boat НДНД Navigator AIR310 :
1. Distinct deadrise similar to Air330-360 models
2. the organic contours of the inflatable boat and the design itself make it very attractive
3. fittings are used: Ukrainian-made
4. Pvc material: main suppliers Taiwan, South Korea, Germany
5. A confident exit on the glider with one person weighing 90-100kg is possible with motors of 5~6 hp. The location of the captain in these models is closer to the center.
6. Optimal motor for this model 9.8 hp
7. Relatively light weight of the pvc boat within 45kg, of which: benches-oars-pump-stretch kit weighs 8kg
8. When transporting freely fits in the trunk of almost any car.
9. This model is CE certified.
Air 310ND Standart boat standard equipment:
| 1) Welded construction of the boat’s cylinders with three independent pressurized compartments.
2) The inflatable keel has an abrasion-resistant protective bar 6 cm wide, which significantly reduces the probability of its damage while driving in shallow water. 3) A wide gunwale 9cm wide. additionally protects the boat’s cylinders and cockpit from splashing. 4) Rulers are glued on the outer perimeter of the boat for passenger safety. 5) Reinforced laminated transom made of water-resistant plywood 24 mm thick. is glued into the aft part of the cylinders. On the inside and outside of the transom is installed a lining of moisture-resistant plywood. A drain valve is installed at the bottom of the transom. 6) Reinforced transom interceptor protects the lower part of the transom from damage in shallow water and forms an optimal angle of attack of the bottom to the water horizon when coming to planing. 7) An anchor rope is attached with an eye ring in the bow of the boat. 8) There are 2 handles for carrying the boat, which are attached to the inner end of the cylinders. 9) The two sliding seats are easily adjustable along the entire length of the rails. 10) Complete with two aluminum paddles 1.6 meters long. 11) A 6-liter foot-operated boat pump. 12) Repair kit for pvc boat (pvc material, glue) 13) Operating Instructions. 14) Small Vessel Certificate. 15) Packing bag for the boat – 1 pc. 16) Base colors: olive, khaki, light gray, dark gray 17) Combination boat color is possible!!!
Buy a boat with an inflatable bottom Navigator Air 310 from the manufacturer in the store navigatorboat.com.ua |
Reviews
There are no reviews yet.