Inflatable boat Navigator H 400 (Navigator H 400)

Description

Special offer: buy a kit at a discount boat + motor!!!

Килевая моторная лодка Navigator H400 комплектуется: якорным роликом, транспортировочными ручками 4 шт, алюминиевыми накладками под стрингера, защитным днищевым брусом шириной 6 см. по килю и баллонам !!!

Navigator H400 – a modern pvc boat with a motor, which combines design, comfort and good handling. An indicator of quality in a boat is the seams. In the Navigator boats they are welded, which is confirmed by the warranty from the factory for 5 years. The space in the boat is enough for free accommodation of 3-4 people, thanks to the increased area of the cockpit 293*91 cm.

High speed and excellent controllability allows you to get maximum pleasure from communicating with the water element. And the presence of a flat hard floor makes staying in the boat comfortable, even during long trips. The rigid floor makes it possible to attach a variety of equipment, such as a folding support for a chair, steering console, etc.

1) Pvc fabrics made in Germany and Korea are used

2) The use of water-resistant plywood 12 mm thick. with non-slip coating.

3) Longitudinal and circumferential welds are made by heat welding.

4)The wide cockpit is provided by the one-piece cut fabric.

5) Raised “zakaya” bow of the boat affecting the seaworthiness of the boat.

6)The design of the cylinder ends contributes to an even landing on the glider.

 

The Navigator 400 motorboat is equipped with

1) Welded construction of the cylinders with natural hermetic compartments.2)The inflatable keel has a wear-resistant protective bar thickness of 6 cm, which is very likely to damage it while driving in shallow water.

3) A 9 cm wide gunwale beam with a wave breaker is glued along the boat’s cylinders.

4) A lifeline 8-10 mm thick is glued around the outer perimeter of the boat.

5) Bottom type – rigid floor (floorboard) made of 5 sheets of waterproof plywood with aluminum profiles, 12 mm thick with non-slip coating.

6) Two stringers are provided to increase the rigidity of the floor.

7) Reinforced stationary transom made of water-resistant plywood 24 mm thick is glued into the stern of the cylinders. The upper part of the transom is equipped with a protective cover and the lower part with a drain valve.

8) The transom is designed for engines with a short stern tube height of 410 mm.

9) An eye ring is used to secure the anchor cable in the bow.

10) The universal bow handle, made of durable plastic, is used to tow the boat and anchor it.

11) Two handles located on the inner surface of the ends of the cylinders allow you to carry the boat for two people.

12) The two sliding seats are easily adjustable along the entire length of the rails.

13) Two collapsible aluminum oars 1.6 meters long.

14) A 6-liter foot-operated boat pump.

15) Repair kit for pvc boat (pvc material, glue).

16) Operating Instructions.

17) Small Vessel Certificate.

18) Packing bag for the boat – 1 pc, packing bag for the floor – 1 pc.

19) Базовые цвета: зеленый, темно-серый, светло-серый !!!

20) Возможен вариант комбинированного цвета лодки !!!

 

It is possible to equip the boat in production:

– installation of transom wheels,

– installation of a shipping tent,

– installation of the bow awning,

– installation of a snatch duck, pvc rod holders, echo sounder table, etc.

– installation of a 12 cm protective bar on the keel and the cylinders,

– making a mat for the boat,

– pvc nose bag,

– pvc bow pouffe,

– Safety vests (one-way),

– Safety vests (two-sided)