Inflatable boat Navigator H 330 (Navigator H 330)

Description

Special offer: buy a kit at a discount boat + motor!!!

Keel boat Navigator H330 comes with: anchor roller, 4 pcs. carrying handles, aluminum overlays under stringers, protective bottom bar 6 cm wide on the keel and cylinders!

Navigator H330 – is the flagship in the line of motor boats of the “Navigator H” series

The boat Navigator H3,3 meters belongs to the category of “keelboats”, also called boats with a rigid bottom.

What is the purpose of a rigid bottom in a small boat:

• Bottom damage protection
• Even load distribution
• Creating a level surface for comfortable movement

The rigid floor is a collapsible bottom that covers the entire bottom of the boat. As a rule, it is made of moisture-resistant marine plywood 12 cm thick. The function of this rigid floor is to strengthen the overall design of the boat, which in turn has a positive effect on the sailing qualities and it becomes very comfortable to fish standing up. The function of this rigid floor is to strengthen the overall design of the boat, which in turn has a positive effect on the sailing qualities and it becomes very comfortable to fish standing up. They securely fasten all parts of the floor, thereby minimizing the “floor folding” effect that can occur when driving at high speeds.

The peculiarity of the design of this series is the variable diameter of the cylinder, which decreases from the stern to the bow of the boat. This makes it easier to switch to “planing” mode with a low-powered engine.

The main criterion in choosing inflatable boats is the quality of seams. In the Navigator boats they are welded, using “hot air” technology

The boats of this series have a one-piece cut fabric, which makes it possible to make a boat with a minimum number of seams. The boat has a total of 4 circular and 2 longitudinal, which provides a high tightness and a spacious cockpit.

Standard equipment of the Navigator 3.3 meter boat

1) The welded cylinders are divided into 3 independent pressurized compartments.

2) A 6 cm wide protective strip is used to protect the keel and the cylinders

3) A 9 cm wide gunwale beam with a wave breaker is glued around the perimeter of the boat.

4) A lifeline 8-10 mm thick is glued around the outer perimeter of the boat.

5) Bottom type – rigid floor (floorboard) made of 5 sheets of water-resistant plywood with aluminum profiles, 12 mm thick with anti-slip coating.

6) Two stringers are provided for increased rigidity of the floor.

7) Reinforced stationary transom made of water-resistant plywood 24 mm thick is glued into the stern of the cylinders. The upper part of the transom is equipped with a protective cover and the lower part with a drain valve.

8) The transom is designed for engines with a short saddle (S) of 410 mm in height.

9) An eye ring is used to secure the anchor cable in the bow.

10) The universal bow handle, made of durable plastic, is used to tow the boat and anchor it.

11) Two handles located on the inner surface of the ends of the cylinders allow you to carry the boat for two people.

12) The two sliding seats are easily adjustable along the entire length of the rails.

13) Two collapsible aluminum oars 1.6 meters long.

14) A 6-liter foot-operated boat pump.

15) Repair kit for pvc boat (pvc material, glue).

16) Operating Instructions.

17) Small Vessel Certificate.

18) Packing bag for the boat – 1 pc, packing bag for the floor – 1 pc.

19) Базовые цвета: зеленый, темно-серый, светло-серый !!!

20) Возможен вариант комбинированного цвета лодки !!!

 

It is possible to equip the boat in production:

– installation of transom wheels,

– installation of a shipping tent,

– installation of the bow awning,

– installation of a snatch duck, pvc rod holders, echo sounder table, etc.

– installation of a 12 cm protective bar on the keel and the cylinders,

– making a mat for the boat,

– pvc nose bag,

– pvc bow pouffe,

– Safety vests (one-way),

– Safety vests (two-sided)