Inflatable boat Navigator H 360 (Navigator H 360)
737 $
boat type: keelboat with rigid deck
Length 360(253) cm,
width 174 (80) cm,
cylinder diameter 44 cm,
Number of pressurized compartments 3+1
620 kg load capacity
Passenger capacity 4 people
recommended engine power of 10 hp.
maximum engine power of 15 hp.
pvc material density 1100 g/m2
transom height 410 mm
boat weight 70 kg
warranty on welds – 5 years
- Description
- Reviews (0)
- Buy on credit
Description
Description
Special offer: buy a kit at a discount boat + motor!!!
Keel motor boat Navigator H 360 komplektuem: bollard roller, handles for carrying in kol-ve 4 pcs, aluminum fasteners under stringers, protective tape of pvc 6 cm wide on the keel and beam!
The main feature of the Navigator H 3.6 meters is a larger and more spacious cockpit 253 * 81 cm, a variable section of cylinders with narrowing to the bow. Obviously, a pronounced keel of a pvc boat with a rigid bottom allows you to have better directional stability in planing and trolling modes.
Durability and tightness of the product provide seams, in Navigator boats they are welded, they are made by the method of “hot air”.
Преимущество надувной лодки Navigator Н360:
1) Using fabrics Korean PVC brand TDS, Unisol density 1100 g/m2 (color light gray, dark gray, khaki).
2) The use of water-resistant plywood 12 mm thick. with non-slip coating.
3) Longitudinal and circumferential welds are made by heat welding.
4)The enlarged cockpit is provided by the one-piece cut fabric.
5) Raised “zakaya” bow of the boat affecting the seaworthiness of the boat.
6)The design of the cylinder ends contributes to an even landing on the glider.
Standard equipment of the boat Navigator H3,6 meters:
1) Welded construction of the cylinders with natural hermetic compartments.2)The inflatable keel has a wear-resistant protective bar thickness of 6 cm, which is very likely to damage it while driving in shallow water.
3) A 9 cm wide gunwale beam with a wave breaker is glued along the boat’s cylinders.
4) A lifeline 8-10 mm thick is glued around the outer perimeter of the boat.
5) Bottom type – rigid floor (floorboard) made of 5 sheets of waterproof plywood with aluminum profiles, 12 mm thick with non-slip coating.
6) Two stringers are provided to increase the rigidity of the floor.
7) Reinforced stationary transom made of water-resistant plywood 24 mm thick is glued into the stern of the cylinders. The upper part of the transom is equipped with a protective cover and the lower part with a drain valve.
8) The transom is designed for engines with a short stern tube height of 410 mm.
9) An eye ring is used to secure the anchor cable in the bow.
10) The universal bow handle, made of durable plastic, is used to tow the boat and anchor it.
11) Two handles located on the inner surface of the ends of the cylinders allow you to carry the boat for two people.
12) The two sliding seats are easily adjustable along the entire length of the rails.
13) Two collapsible aluminum oars 1.6 meters long.
14) A 6-liter foot-operated boat pump.
15) Repair kit for pvc boat (pvc material, glue).
16) Operating Instructions.
17) Small Vessel Certificate.
18) Packing bag for the boat – 1 pc, packing bag for the floor – 1 pc.
19) Базовые цвета: зеленый, темно-серый, светло-серый !!!
20) Возможен вариант комбинированного цвета лодки !!!
It is possible to equip the boat in production:
– installation of transom wheels,
– installation of a shipping tent,
– installation of the bow awning,
– installation of a snatch duck, pvc rod holders, echo sounder table, etc.
– installation of a 12 cm protective bar on the keel and the cylinders,
– making a mat for the boat,
– pvc nose bag,
– pvc bow pouffe,
– Safety vests (one-way),
– Safety vests (two-sided)
Reviews (0)
Be the first to review “Inflatable boat Navigator H 360 (Navigator H 360)”
Buy on credit
You can buy this product on credit
Reviews
There are no reviews yet.